Android 4.3 Jelly Bean XXUENC3 Official Firmware For Samsung Galaxy Note 2 GT-N7100: How To Install It Manually [Tutorial]
PDA: N7100XXUENC3
CSC: N7100AUTENC2
Modem: N7100XXUENA3
Android Version: 4.3
Build date: Fri, 07 Mar 2014
Region: Switzerland
Now, check out the manual installation tutorial for updating the Galaxy Note 2 (GT-N7100) to the new firmware below.
Crucial Points To Remember
- Ensure that you have proper backup for data.
- Ensure that your Samsung Galaxy Note 2 has at least 80 percent battery power.
- You must have the USB drivers for your device installed on your computer. [Download]
- Ensure that USB Debugging in enabled on the device.
- After flashing the firmware, you will lose custom ROMs such as CM10, Paranoid Android or AOKP installed in your device.
NOTE: International Business Times will not be responsible for anything that goes wrong. Users should proceed at their own risk.
Step 1: Download the updated firmware package and extract the zip file. [Download: Netherlands, Switzerland]
Step 2: Download Odin v3.09 and extract the zip file.
Step 3: Switch off the Galaxy Note 2 and put it in Download Mode. To do this, press Volume Down + Home + Power buttons. After you get a warning message on the screen, press Volume Up button to enter Download Mode.
Step 4: Run Odin v3.09.exe as an Administrator.
Step 5: Connect the Galaxy Note 2 to your computer via the USB cable while the phone is in the Download mode.
If the phone is connected properly, you will see that the ID:COM section turns Yellow with a message appearing in Odin’s message box, saying “Added!!” If not, check whether the USB drivers are installed properly on the computer.
Step 6: Now, click on the AP button in Odin and select the .tar.md5 file that you have downloaded in Step 1.
Step 7: In Odin, select the Auto Reboot and F. Reset Time options, but make sure that the re-partition checkbox is not selected.
Step 8: Now, click on the Start button in Odin to begin the installation process.
Step 9: After the installation is complete, the Galaxy Note 2 will restart. Once you see the Samsung logo on the home screen, unplug the device from the computer and close Odin.
[Source: True Android]
CSC: N7100AUTENC2
Modem: N7100XXUENA3
Android Version: 4.3
Build date: Fri, 07 Mar 2014
Region: Switzerland
Now, check out the manual installation tutorial for updating the Galaxy Note 2 (GT-N7100) to the new firmware below.
Crucial Points To Remember
- Ensure that you have proper backup for data.
- Ensure that your Samsung Galaxy Note 2 has at least 80 percent battery power.
- You must have the USB drivers for your device installed on your computer. [Download]
- Ensure that USB Debugging in enabled on the device.
- After flashing the firmware, you will lose custom ROMs such as CM10, Paranoid Android or AOKP installed in your device.
NOTE: International Business Times will not be responsible for anything that goes wrong. Users should proceed at their own risk.
Step 1: Download the updated firmware package and extract the zip file. [Download: Netherlands, Switzerland]
Step 2: Download Odin v3.09 and extract the zip file.
Step 3: Switch off the Galaxy Note 2 and put it in Download Mode. To do this, press Volume Down + Home + Power buttons. After you get a warning message on the screen, press Volume Up button to enter Download Mode.
Step 4: Run Odin v3.09.exe as an Administrator.
Step 5: Connect the Galaxy Note 2 to your computer via the USB cable while the phone is in the Download mode.
If the phone is connected properly, you will see that the ID:COM section turns Yellow with a message appearing in Odin’s message box, saying “Added!!” If not, check whether the USB drivers are installed properly on the computer.
Step 6: Now, click on the AP button in Odin and select the .tar.md5 file that you have downloaded in Step 1.
Step 7: In Odin, select the Auto Reboot and F. Reset Time options, but make sure that the re-partition checkbox is not selected.
Step 8: Now, click on the Start button in Odin to begin the installation process.
Step 9: After the installation is complete, the Galaxy Note 2 will restart. Once you see the Samsung logo on the home screen, unplug the device from the computer and close Odin.
[Source: True Android]
Birthday - 13/12/1964
Death - 02/05/1997
bye bye hide
No comments:
Post a Comment