welcome

welcome to my destiny :)
I'm just a guy who is smile a lot
and the god give me a power
-------------------------------------------

You say anything Just tell me all your sweet lies

-------------------------------------------------

Time may change my life
But my heart remains the same to you
Time may change your heart
My love for you never changes

Showing posts with label problem. Show all posts
Showing posts with label problem. Show all posts

Monday, May 21, 2012

how to remove Windows Genuine Advantage windows 7 windows xp

Ultimate Windows Genuine Advantage (WGA) Remover

 download 

for windows 7 


http://www.mediafire.com/?dc7q0lahg19xdfk

 

Here is the ultimate Windows Genuine Advantage (WGA) remover for those who are getting annoyed by the Windows Genuine Advantage popping up every few second.
windows genuine advantage Ultimate Windows Genuine Advantage (WGA) Remover

You did install the latest updates recommended by Windows, now you get a message saying: this copy of Windows is not genuine, you may be victim of software counterfeiting.
To disable Ultimate Windows Genuine Advantage (WGA) once for all, simply download and install WGA remover.
zip Ultimate Windows Genuine Advantage (WGA) Remover  WGA Remover (1.0 MiB, 588,946 downloads)
Updated in February, 2012 – this version of WGA Remover is recommended for Windows7 users.
zip Ultimate Windows Genuine Advantage (WGA) Remover  WGA Remover 2012 for Windows7 (1.6 MiB, 1,158,592 downloads)
Once patch is installed, reboot the Windows.

http://fixexe.com/ultimate-windows-genuine-advantage-wga-remover/

 

Sunday, September 25, 2011

Task Manager has been disabled by your administrator


Symptom

When you try to open Task Manager, the following error may occur:
Task Manager has been disabled by your administrator

Resolution

This error is caused if the DisableTaskMgr restriction is enabled. To enable Task Manager, try one of these methods:
IMPORTANT:  If this restriction was enabled in your system without you doing anything or without your knowledge, then it's highly likely that a Virus has blocked the usage of Task Manager in your system by enabling the DisableTaskMgr policy via the registry. I strongly suggest that you perform a thorough checkup of your system immediately. Steps listed in the Resolution section of this article helps you unblock the Task Manager, but that does not remove the Virus (if any) from your system.

Method 1

Click Start, Run and type this command exactly as given below: (better - Copy and paste)

Method 2

Download and run this REG fix and double-click it.

Method 3

  • Click Start, Run and type Regedit.exe
  • Navigate to the following branch:
HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies\ System
  • In the right-pane, delete the value named DisableTaskMgr
  • Close Regedit.exe

Method 4:  Using Group Policy Editor - for Windows XP Professional

  • Click Start, Run, type gpedit.msc and click OK.
  • Navigate to this branch:
User Configuration / Administrative Templates / System / Ctrl+Alt+Delete Options / Remove Task Manager
  • Double-click the Remove Task Manager option.
  • Set the policy to Not Configured.

http://windowsxp.mvps.org/Taskmanager_error.htm

Wednesday, April 6, 2011

fix Error 3194 downgrade iphone

1. ไปที่ Notepad คลิกขวาแล้วเลือก Run as administrator กดเปิดขึ้นมา
2. จากใน Notepad ให้ เลือก File>>Open แล้ว Browse ไฟล์ไปหา C:\Windows\System32\drivers\etc\hosts (ตรงด้านล่างของตอน browse ไฟล์ ตรง File of type ให้เลือกเป็น All files ตรงนี้ถ้าไม่เลือกจะมองไม่เห็น มันมีสองตัวเลือกตัวแรก)
3. ใส่คำนี้ "74.208.10.249 gs.apple.com" ลงไปในบรรทัดสุดท้าย(ไม่ต้องใส่ ")
4. กด Save แล้วลองทำการ restore ใหม่
ได้ยังไงมาบอกต่อกันด้วยครับ ถ้าไม่ได้จะได้หาทางช่วยกันต่อไป
credit : www.vyane.com

แล้วก็จะ Error 1015 ก็ไปตามลิ้งค์นี้เลยครับ

http://pdamobiz.com/forum/forum_posts.asp?TID=320943&KW=downgrade

Sunday, March 20, 2011

How to Display Language Bar on Windows XP

1. Click Start at the bottom left, and click Control Panel.


2. Click Date, Time, Language, and Regional Option.


3. Click Regional and Language Options.


4. Click Languages.


5. Click Details...


6. Click Language Bar.


7. Check both "Show the Language bar on the desktop" and "Show additional Language bar icons in the task bar".
Finally, click OK.


8. Your Language bar is back!


9. This procedure is just an additional idea for your convenience.

If you think this bar is far too long with some docs that you would never use, right-click somewhere vacant on Language bar.
A small window pops up. You may choose any apperance on it or just click on the check to remove Text Labels.


10. Done!

credit
http://www.e-nihongo.net/japcomp/jap_xp/bar_again.html

Tuesday, July 13, 2010

No service after jailbreak/unlock 3GS 3.1.2

jailbreak is not unlocking it. you need to get ultrasn0w via cydia.

how to get ultrasn0w

-----------------------------------------------

  • Ensure that you have upgraded to iPhone OS 3.0
  • Jailbreak your iPhone 3G using redsn0w or PwnageTool (this will also install Cydia/Icy)
  • Run Cydia or Icy
  • Add the repo repo666.ultrasn0w.com to Cydia or Icy. That last “o” is actually the number zero “0”! If you use the letter “o” you’ll get an error.
  • Search for ‘ultrasn0w’ in cydia or icy and install ultrasn0w
  • Reboot your iPhone 3G
  • T-Mobile USA users should disable 3G before using ultrasn0w. To disable 3G, go to Settings->General->Network on your iPhone and turn off 3G Mode.

Read more: http://techblissonline.com/download-ultrasn0w-and-unlock-iphone-3g-os-30/#ixzz0tcWcEKLD

----------------------------------

http://techblissonline.com/download-ultrasn0w-and-unlock-iphone-3g-os-30/

Thursday, June 17, 2010

Error Code ที่เกิดขึ้นตอน Restore iPhone Firmware แต่ละ Code หมายถึงอะไร?

itunes-error-code-1015

ในขั้นตอนของการ Restore Firmware ให้กับ iPhone นั้นบางครั้งเราอาจจะต้องพบกับ Error ที่เราคาดไม่ถึงซึ่ง Error Code ที่่แจ้งเรานั้นมันก็มีความหมายที่แตกต่างกันออกไปครับ วันนี้เรามาดูกันว่าในแต่ละ Code นั้นมันหมายถึงอาการอะไร และมีวิธีแก้ไขอย่างไร บทความนี้นำมาจากคุณ iKimDoGym แห่ง PDAMobiz ครับ

Restore แล้วเกิด Error ตัวเลขค่าต่างๆ

- Error 1 ยังไม่ทราบสาเหตุที่แน่ชัด
วิธีแก้
ให้ Restart Computer 1 ครั้ง หรือ DFU ในการ Restore

- Error 9 ยังไม่ทราบสาเหตุที่แน่ชัด

-ไม่มี Error ค่าใดๆ
ลอง DFU ใช้ Original Firmware ในการ Restore ผ่านปกติแล้ว แต่ Boot ไม่ขึ้นติดหน้า Applo Logo ทุกรอบ ซึ่งอาจเกิดจาก Bootloader ที่บอร์ดมีปัญหา
วิธีแก้
เปลี่ยนบอร์ดอย่างเดียวประมาณ 4500-5000 บาท

- Error 10 – 50 ยังไม่ทราบสาเหตุที่แน่ชัด
วิธีแก้
เข้าไปที่ Control Panel ที่ Add/ Remove Program ให้จัดการ Remove
- iTunes
- Apple Mobile Device Support
- QuickTime
- Apple Software Update
ลง iTunes เวอร์ชันที่ต่ำกว่าได้นะครับ โดยให้ลบโฟลเดอร์ที่ชื่อ Apple Computer ด้วย ซึ่งจะอยู่ใน C:\Document and Setting\ชื่อ User ที่ล็อคอิน\Application Data\Apple Computer
(หมายเหตุ : โฟลเดอร์ Application Data จะถูกซ่อนไว้จึงไม่ปรากฏให้เห็นต้องไปตั้งค่าให้ Show ครับ) ตั้งค้าตามรูปภาพ ดังนี้
1. เปิด My Computer
2.ตั้งค่าตามรูป

iphone-error-code

iphone-error-code-2

-จากนั้นก็ตามไปลบโฟลเดอร์ Apple Computer ที่ C:\Document and Setting\ชื่อ User ที่ล็อคอิน\Application Data\Apple Computer

และที่ My Document ในโฟลเดอร์ My Music จะเห็นโฟลเดอร์ iTunes ให้เปลี่ยนชื่อโฟลเดอร์นี้เป็น iTunes.bak ครับ
จากนั้นค่อย Restart Computer และ install iTunes เวอร์ชันที่ต่ำกว่าได้ครับ
-จากนั้นให้เข้า DFU แล้วใช้ Original Firmware ในการ Restore

- Error 1600 – 1604
อาจเกิดจากการที่เราเข้า DFU แล้วใช้ Custom Firmware ในการเลือก Restore
หรือ อาจเกิดจากที่เราใช้ Firmware เวอร์ชันใดเวอร์ชันนึงอยู่ใน iPhone ณ ปัจจุบัน แล้วเข้า Recovery Mode ในการ Restore Firmware ที่ต่ำกว่าที่ใช้อยู่ใน iPhone จึงทำให้ Restore แล้วไม่ผ่านติด Error 1604 ดังกล่าว

วิธีแก้

เมื่อ เราจะย้อนกลับหรือดาวน์เกรดเฟิร์มแวร์ เราควรนำ iPhone เข้า DFU Mode เข้ากับ iTunes ที่ออกมาพร้อมกับ Firmware นั้นๆที่เรากำลังจะดาวน์เกรดครับ เช่น iPhone Classic จะย้อนกลับไปใช้ Firmware 2.0 ก็ต้อง DFU Mode ใช้คู่กับ iTunes 7.7.1 ในการ Restore เพื่อดาวน์เกรดเฟิร์มแวร์ เป็นต้น
ถ้าไม่ได้จงใจดาวน์เกรดก็สามารถจัดการ DFU แล้ว Restore ด้วย Original Firmware ปัจจุบันที่ใช้บน iPhone ก่อนติด Error นี้

- Error 1011 , 1013 และ 1015

เกิดจาการที่เราทำการ Downgrade Firmware ลงไปเวอร์ชันที่ต่ำกว่า ซึ่งเกิดจากไม่สามารถเขียน Baseband ทับลงไปได้นั่นเอง
วิธีแก้
iPhone Classic จัดการ Jailbreak แล้วลบ Baseband จากนั้น Restore แล้ว jailbreak และ Unlock ใหม่
iPhone 3G ประเภท Official Unlock สามารถ Activate ที่ iTunes ได้โดยใช้ QuickPwn มาเปิดล่อแล้วทำตามกด Power+Home ค้าง 15 วินาที จากนั้น iTunes จะทำการ Activate ให้อัตโนมัติ แล้วทำการ Jailbreak
iPhone 3G ติดล็อค ให้จัดการ Jailbreak ด้วย QuickPwn แล้วหาซิมประกบที่รองรับ Baseband นั้นๆมาใส่เพื่อปลดล็อคสัญญาณโทรศัพท์

- Error 1011 , 1002
ส่วน มากจะเกิดจาก Hardware มีปัญหาหรือบอร์ดมีปัญหานั่นเองทำให้ DFU แล้ว Restore กี่ครั้งก็ไม่ได้ เมื่อ Jailbreak แล้วเจอปัญหาดังนี้
Settings > General > About จะเห็นค่างต่างๆดังนี้
Wi-Fi Address ขึ้น N/A
Bluetooth ขึ้น 00:00:00:00:00:00
EMEI ไม่ขึ้นอะไรเลย
วิธีแก้
ลองอัพเดตไปยังเฟิร์มแวร์ตัวล่าสุดถ้าไม่หายคงได้เปลี่ยนบอร์ดอย่างเดียวประมาณ 4500-5000 บาท

- Error 2003 อาจเกิดจากไฟล์ Firmware เสียหาย

วิธีแก้
ดาวน์โหลด Original Firmware มาใช้ในการ Restore ใหม่

http://www.pokpitch.com/2009/the-meaning-of-error-code-when-restore-iphone-firmware


Tuesday, February 23, 2010

windows/system32/sshnas21.dll fix window 7

According to this site, sshnas.dll is a component of trojan FakeAlert. The trojan come from malicious websites that ask users to download an Adobe Flash Player update or player needed to view a movie online. The filename of the trojan is flash-HQ-plugin. Once started, the trojan will download and install core components: c.exe, msa.exe and sshnas.dll. When downloaded, it will be configured to start automatically when Windows starts. Trojan FakeAlert may display many popups and fake security alerts, hijack Internet Explorer, disable Windows Task Manager and Registry editor.

To remove the Startup annoying: (Source)
1. Download and install FreeFixer.
2. Launch FreeFixer and start a scan. It should be finished in about five minutes.
3. In the scan result, scroll down to "Registry startups". Locate the following item:

rundll32.exe C:\Windows\system32\sshnas21.dll,AllocConsoleA

and click its delete checkbox to the left. Don't check anything else for deletion, unless you are 100% positive it is malware.

4. Click Fix.
5. Restart your machine.
6. Start FreeFixer again and run a scan. Verify that sshas21.dll no longer appear anywhere in the scan result.

Did that remove sshas21.dll from your system carmona?

Take care and God bless

http://www.pc-forums.org/forum/security-central/windowssystem32sshnas21-dll-cannot-found-help-please/?PHPSESSID=b3d502d73f62893414f89534d307f65a

Error 1720 Windows installer error

Error 1720 Windows installer error


Download, and install the newest installer from Microsoft, and see if it works.

http://support.microsoft.com/?id=893803

download Windows Script and see how it works out for you

http://forums.support.roxio.com/lofiversion/index.php/t20404.html

Saturday, August 9, 2008

How to Fix svchost.exe using 100% CPU / Memory Leak

How to Fix svchost.exe using 100% CPU / Memory Leak

As a computer technician, here is a problem I have been coming across more and more. About 30secs to 1 minute after booting into Windows the computer starts lagging heavily. When CTRL+ALT+DEL is pressed it shows that svchost.exe is using up maximum CPU resources and only occurs when Automatic Updates is enabled. Microsoft has recognized this problem and has released a patch. However, on all computers I have worked on with this problem, the Microsoft patches don’t fix the problem. This is a guide on how to fix this problem with svchost using maximum CPU.

First of all, to identify if you have this problem you need to press CTRL+ALT+DEL all at the same time, go to the “Processes Tab” and then press “Mem Usage”. If you have this svchost.exe memory leak bug after about 1 minute you will see that the amount of memory usage svchost.exe uses will keep increasing until CPU becomes 99 or 100%. Below is an example of what this looks like:

svchost.exe memory leak shown in Windows Task Manager


How to stop svchost.exe using up 100% system resources (Windows XP Only):

  • Visit the Microsoft website and Download Windows Update v3 WindowsUpdateAgent30-x86.exe and save it to your C:\ drive
  • Download this file fix_svchost.bat (right click and choose save as..) and save it to your C:\ drive
  • Download this file WindowsXP-KB927891.exe (right click and choose save as..) and save it to your C:\ drive
  • Reboot the computer and log in to Windows XP in safe mode. To do this, press F8 just before the WindowsXP logo shows up during boot and press up to choose “Safe Mode”
  • Once Windows has loaded and you have the option of which user account to use, log on as “Administrator”.
  • Click Start > Run, choose the Browse button and find the fix_svchost.bat file you saved before, press Open, then OK.
  • A black screen will pop up and white text will scroll past. Wait for this process to finish as it could take several minutes. It will close itself when its finished.
  • Once the black screen disappears, Click Start > Run, choose the Browse button and find the WindowsUpdateAgent30-x86.exe file you saved before, press Open, then OK. Follow the prompts as it installs.
  • When Windows Update Agent finishes installing, Click Start > Run, choose the Browse button and find the WindowsXP-KB927891.exe file you saved before, press Open, then OK. Follow the prompts as it installs.
  • Reboot the computer

How to remove “scvhost.exe - New Folder.exe - AutoRun.inf” virus?

How to remove “scvhost.exe - New Folder.exe - AutoRun.inf” virus? (Broken link fixed)

Just this night I got a good mood after I fixed the "scvhost.exe - New Folder.exe - AutoRun.inf" virus in Windows XP. But of course, before I was able to fix it, I did have a damn whole bad day. What about this virus (or Worm, Trojan, Spyware?) anyway, and how it pissed me off really bad? Well, though I can just give you the details about my experience while this was running on my PC, I’m not really an expert when it comes to virus thingy. Anyway, here are the details:

The first thing you would experience is that your Task Manager will be disabled. It will prompt, "Task Manager has been disabled by your Administrator." Of course, obviously, this gives you a clue that the virus prohibits the user to end its process. But not just that, when you try to open your Registry through "Regedit", it will also prompt that your Registry has also been disabled. Later, as it progresses in the long run, you will soon find out that it automatically closes some opened windows application. The worse, even the "Command Prompt" and "Folder Options" won’t be accessed anymore. You can even experience that the "Accessories" on your Start Menu will be gone. Therefore, you cannot access your Command Prompt unless you would directly run it through your system32 folder. Just stressing this out, if you’re thinking that you can still access "Command Prompt" using your "Run" command, nope… The same parasite will disable some of your keystrokes. Meaning, you won’t be able to type anything. Simply, almost all the possible means of knowing the tasks running (since you can also view a list of tasks using Command Prompt then tasklist.exe) has been blocked.

Funny to say but I had a rather, logical means of trying to solve this. Since I cannot open "cmd" or "Command Prompt", I thought of "gpedit.msc" to somehow re-enable my "Task Manager". Well, what I did was to open my "Run" command. I didn’t type anything since I knew I couldn’t type anything at all. So, I was beginning searching for characters which I can copy to my clipboard and paste to my "Run". Got the view? Literally, I was copy-pasting characters until I spell out the word "gpedit.msc". Hehehehe… I did open my gpedit, but unlicky, this still wasn’t able to solve the problem. The "gpedit.msc" window appeared only for a second, and it closed immediately.

I couldn’t find anymore ways, but finally, I thought of a program created in VB which I used before to stop a Spyware from running. Thanks to "Visual Basic Beginner" from PSCode.com. He created a program which he called "The Terminator". Designed specifically to stop running applications even at the same time. Plus, it displays the exact location on where the running program is located. Also, I used a tool which can unlock restrictions, the "Remove Restrictions Tool (RRT)" from www.Sergiwa.com. I have compiled these two applications into one compressed folder which you can download here. And please don’t forget that the credits should be given to them. How were these applications able to help me?

Hmmm… Luckily, though the virus has the ability to close some opened window, but these applications weren’t part of those restricted by this virus. Strictly guys, you should do these when you already have those applications on your PC:

1. Run RRT and then press "Check All" then "Remove". By doing this, all the restrictions made by the virus should now be unlocked.

2. Access your Folder Options, in either in the Control Panel, or simply on one of the menus under "Tools" in any opened folder. Select "View" tab and "Show hidden files and folders".

3. You may not be able to fully access your Task Manager, so use "The Terminator" instead. Run "The Terminator" and check all the processess having the following descriptions:

  • Any running process having "scvhost" in it. Strictly, you should be able to notice carefully that it is "scvhost" and not "svchost". Since you might crash the PC if you accidentally end the "svchost" task.
  • If there is a task running with the file extension ".pif" then include it as part of the checklist to terminate.
  • There are certain processess in the list wherein as you notice in its location where it is running, the Filename is named the same as its folder where it is located. For example, "C:\Program Files\Games\Games.exe". As you notice, the "Games.exe" that is running is located to a folder name "Games", since the virus also creates replications named after its location. Include these processess in the list.

4. After checking all the necessary processess, then press "Terminate all checked processess".


After doing this, you may already notice that you can once again normally use your keyboard, access your task manager, command prompt and regedit, like you can before. But this doesn’t end here. You are still half way the progress. Next things you must do are the following:

1. Go to your My Computer. Right click on it and choose "Search". This time, we’ll search for those replications manually. Basically, we have to remove ALL of them. As I noticed, all replications have common characteristics. First, they are all executable files but categorized as an "Icon" file. It has an obvious icon the same as a "Folder" icon. You can easily notice it since it has a low resolution icon image. All of these replications have a common size at 221 kb.

2. Specify your searching options. Search for "All files and folders". Just leave "All or part of the file name" and "A word or phrase in the file" blank. Select "More advanced options". Check all options except for "Case sensitive" and "Search tape backup". Select the "What size is it?" option, and choose "specify size (in kb)", "at least 220 kb". Then begin searching by pressing the "Search" button.

3. As soon as searching is done, sort out all the found items according to size. Then highlight all items which are 221 kb in size, and file type is "ICON". They are actually executable files in which IF you accidentally open will result you to start again from the very beginning. So be careful not to double-click it. Delete all these files using "Shift+Delete" to permanently remove them.

4. If you are able to successfully remove all these files, then celebrate! Since you are almost done. The next one will be a bit more complicated. Go to your hard drives (if there are lots of partition then check all partitions). You may notice a file called "Autorun.inf". This is basically the reason why the heck when you open your hard drive it will ask you how to open it as if it is a file. So remove also these files. Also, go to your startup directories such as "C:\Documents and Settings\All Users\Start Menu\Programs\Startup" and other user startup directories for Documents. Delete the file AdobeGamma.pif (if there’s any) and the "Desktop.ini" file. I’m not totally sure but I think these files are unnecessary.

File removal: Done! Final step: Editing the Registry.

The easiest way to change back the Registry to normal is:

1. Open your "regedit" by typing in your "Run" command, "regedit" then press OK.

2. In your Registry Editor, go to "Edit | Find" or simply press "Ctrl+F". Type there "scvhost". Make sure all check boxes are checked.

3. Everything that is found using this search must either be deleted OR left blank. I assume you are already knowledgable enough whether what keys to delete and what to not. But if you do not know what you are trying to edit, then it’s better to change all strings having the "scvhost" string to blank. Be careful when you reach to a search wherein there is "C:\WINDOWS\explorer.exe scvhost.exe" or something like that. Just remove the "scvhost.exe". Don’t include "C:\WINDOWS\explorer.exe".

So, until you finally are able to find no more entries in the Registry about "scvhost" then Congratulations! Though I’m not really that sure if the virus has been completely removed but as I noticed, even if I already restarted the PC, I can already feel my PCs running smooth again.

If you have some comments or clarifications or perhaps additional information about this virus (?) please leave it here. I would be grateful to hear it out from you. Thanks! emoticon


all content by http://ronaldborla.blogsome.com/

Wednesday, July 30, 2008

What are Bad Clusters?

The data on a hard drive is broken down into sectors. When a small amount of data becomes corrupted, that area of the hard drive becomes unusable. When you format the drive (high level format) the bad clusters are not removed because the format simply knows to skip over the bad clusters. Correct me if I'm wrong, but I think that a low-level (writing zeros) format may correct bad clusters. If it doesn't, it would seem that there is a physical problem with the disk, and nothing could fix that. If there was a problem with the drive's connection to the power supply, it is possible that it got some physical magnetic errors through a power surge of some type.

more source

http://www.daniweb.com/forums/thread16367.html

http://www.webdeveloper.com/forum/archive/index.php/t-58623.html

Saturday, May 17, 2008

Task Manager Has Been Disabled, How to Fix It?

Task Manager Has Been Disabled, How to Fix It?

Many times when working on a computer that has been infected with a virus, trojan, or piece of spyware I find myself with the Task Manager being disabled. Malware creators like to disable Task Manager so it makes solving the problem and removing the issue difficult.

If this happens you'll normally have to edit the Windows registry to fix the problem. A restriction has been placed on the user to not allow them to run Task Manager, this might be ok in an office environment where the IT department wants to control things, but in a home office this can cause major problems trying to fix a malware or virus issue.

Listed below you will find the many ways to reenable Task Manager along with an automatic method that works wonders.


To open the Task Manager, you normally would do one of the following:
Press CTRL-ALT-DEL on the keyboard
Press CTRL-SHIFT-ESC on the keyboard
Right-click on a blank area on the start bar and choose Task Manager
Click on Start, Run and type TASKMGR in the run box and press Enter
Sometimes instead of Task Manager opening you'll see the following screen. In these cases, you'll have to follow the methods below to re-enable access to the Task Manager.


First we'll begin with the various registry modification methods for correcting this problem.

Method 1 - Using the Group Policy Editor in Windows XP Professional

Click Start, Run, type gpedit.msc and click OK.
Under User Configuration, Click on the plus (+) next to Administrative Templates
Click on the plus (+) next tSystem, then click on Ctrl+Alt+Delete Options
Find Remove Task Manager in the right-hand pane and double click on it
Choose the option "Not Configured" and click Ok.
Close the Group Policy Window

Method 2: Change the Task Manager Option through the Run line

Click on Start, Run and type the following command exactly and press Enter
REG add HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System /v DisableTaskMgr /t REG_DWORD /d 0 /f

Method 3: Change Task Manager through a Registry REG file

Click on Start, Run, and type Notepad and press Enter
Copy and paste the information between the dotted lines into Notepad and save it to your desktop as taskmanager.reg
------------------------------------
Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
"DisableTaskMgr"=dword:00000000
-------------------------------------

3. Double click on the taskmanager.reg file to enter the information into the Windows registry

Method 4: Delete the restriction in the registry manually

Click on Start, Run, and type REGEDIT and press Enter
Navigate to the following branch

HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies\ System

In the right pane, find and delete the value named DisableTaskMgr
Close the registry editor

Method 5: Download and Run FixTaskManager program

Click on the following links and download the program FixTaskManager to your Desktop

Main Site

Backup Location
Double-click on the file FixTaskManager on your desktop and run it

soruce : http://www.pchell.com/support/taskmanagerdisabled.shtml

Tuesday, May 6, 2008

solved folder option hidden

if you want restore folder options
A) Restore folder options
1. Use RUN open 'gpedit.msc'
2. Goto Local Computer Policy > User Configuration > Administrative Templates > Windows components > Windows Explorer
3. Look on your right hand side, look for "Remove the Folder Optons menu item from the Tools menu
4. Double click on that, then select not configured or disable
5. Restart your PC

B)
1. Use RUN open 'regedit'
2. Goto HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
3. Look on your right hand side, find 'Nofolderoptions', change it as 0 or delete the key
4. Restart PC

Hope this can help u to find out the virus

http://forum.lowyat.net/topic/653350

Wednesday, January 30, 2008

how to fix NTLDR missing!




copy file 2 files NTDETECT.COM and NTLDR from cd window xp/i386 to root hard disk
it's very easy right

more

LinkWithin

Related Posts Plugin for WordPress, Blogger...

Fm-radio-on-my-site

for you forever

Birthday - 13/12/1964 Death - 02/05/1997 bye bye hide

google analysis

ຊີວິດກໍ່ເໝືອນລະຄອນຕ່າງທີ່ບໍ່ສາດມາດຫຼິ້ນຄືນໃໝ່ໄດ້
ຊີວິດແມ່ນການສະແດງ ທີ່ບໍ່ມີຜູ້ກຳກັບ

online
Online Casino


website counter